Fieldpiece SDMN6 Dual Port Manometer and Pressure Switch Tester

Fieldpiece SDMN6 Dual Port Manometer and Pressure Switch Tester
Fieldpiece SDMN6 Dual Port Manometer and Pressure Switch Tester
Fieldpiece SDMN6 Dual Port Manometer and Pressure Switch Tester
Fieldpiece SDMN6 Dual Port Manometer and Pressure Switch Tester

Fieldpiece SDMN6 Dual Port Manometer and Pressure Switch Tester

$262.65

The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner.

Product Documents

Users Manual

SKU: SDMN6
Compare

Description

The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it’s running properly, or if it’s starting to fail which can cause the furnace to work in an unsafe manner. Plus, with the SDMN6 you can easily calibrate any adjustable pressure switch to manufacturers’ specifications, so there’s no need to carry a large variety of pressure switches on your truck.

The Dual Port Manometer has the ranges to measure gas pressure and the resolution needed to measure static pressure. Ideal for HVACR field service technicians, the SDMN6 can determine if the gas pressure coming into the house or out of the regulator are correct. The SDMN6 measures gas pressure up to 60″ water column (WC) with a resolution of 0.1″ WC. In addition, the unit measures both negative and positive pressures, which is used for measurement on vacuum control lines. The unit will take differential pressure readings and display the difference between P1 and P2 at all times in the lower right corner of the easy-to-read LCD. Four different measurement scales can be used: inches of water column, millimeters of water column, mBar, and PSI.

The SDMN6 also has a zero adjust to zero out the meter in different ambient pressures. It has a hold button to hold the currently displayed reading. The auto-power-off function conserves battery life, but can be disabled if desired.

In the static pressure mode, the unit can measure up to 2″WC with resolution to 0.010″WC, which enables a technician to measure small differences in air (or static) pressure.

 

 

 

Additional information

Type

Manometer

Application

HVAC

Accuracy

Stated accuracy at 0 to 50°C (32 to 122°F): ±1.5% FS

Operating Environment

32°F to 118°F (0°C to 48°C) at <80% RH

Overrange

"OL" or "-OL" displayed

Auto-Off

15 minutes

Compatible Media

Dry non-corrosive gases

Battery Type

9V NEDA 1604A IEC 6LR61 9V alkaline

Battery Life

200 hours with low battery indicator on display

Height

7.0625

Width

2-3/8"

Depth

1-3/16"

Reviews

There are no reviews yet.


Be the first to review “Fieldpiece SDMN6 Dual Port Manometer and Pressure Switch Tester”

You've just added this product to the cart: