FLUKE 62 Max Mini Infrared Thermometer

FLUKE 62 Max Mini Infrared Thermometer

FLUKE 62 Max Mini Infrared Thermometer

$113.99

The Fluke 62 MAX Infrared thermometer delivers many of the features of the Fluke 62 MAX+, but features a single laser and 10:1 distance to spot ratio. You can use the Fluke 62 MAX Perform non-contact temperature measurements on transformers, motors, pumps, panels, breakers, compressors, ducts, steam lines, valves, and vents with this infrared thermometer. It features a single laser with a distance to spot ratio of 10:1. Additionally, it’s rugged design withstands a 9.8′ (3 m) drop.

Product Documents

Owner Manual

Datasheet

SKU: F-62MAX
Compare

Description

Fluke 62 Max Infrared Thermometer delivers single-laser targeting accuracy

The Fluke 62 MAX Infrared thermometer delivers many of the features of the Fluke 62 MAX+, but features a single laser and 10:1 distance to spot ratio. You can use the Fluke 62 MAX Perform non-contact temperature measurements on transformers, motors, pumps, panels, breakers, compressors, ducts, steam lines, valves, and vents with this infrared thermometer. It features a single laser with a distance to spot ratio of 10:1. Additionally, it’s rugged design withstands a 9.8′ (3 m) drop.The single laser helps you pinpoint the target for more accurate readings and makes it easier to measure temperatures in hard to reach areas. With its IP54 rating for dust and water resistance you can rely the Fluke 62 MAX to deliver accurate, repeatable temperature measurements, rain or shine, in even the dirtiest and dustiest industrial sites. And it’s rugged enough to take a 3-meter drop so no worries even if you work from a ladder.

 

Product Features

  • Highly accurate infrared thermometer for measuring temperatures from -30°C to 500°C (-22°F to 932°F) accurate to +1.5°C or +1.5% of reading (whichever is greater)
  • Provides a 10:1 Distance to spot ratio
  • Offers single laser targeting for accurate and repeatable measurements
  • Withstands a 3 m (9.8 ft.) drop
  • High and low alarms for rapid detection of temperatures outside the limits
  • Powered by a single, standard AA battery.
  • Comes with a three-year warranty -30-
  • Features IP54 rating against dust and moisture
  • Offers small, lightweight form factor to clip comfortably to your tool belt or belt loop, or easily fit in your tool box
  • Features a large, backlit display to make data easier to read, even in dark areas.
  • Displays Min/Max/Avg/Dif: the minimum, maximum or average temperature, or the difference between two measurements

Additional information

Weight 128 oz
Dimensions 10 × 10 × 10 in
Temperature Range

-22 to 932°F (-30 to 500°C)

Accuracy

±34.7°F (±1.5°C) or ±1.5% of reading, whichever is greater
14 to 32°F (-10 to 0°C): ±2.0
-22 to 14°F (-30 to -10°C): ±3.0

Response Time

(95%) <500 ms (95% of reading)

Spectral Response

8 to 14 microns

Emissivity

0.10 to 1.00

Optical Resolution

10:1 (calculated at 90% energy)

Display Resolution

0.2°F (0.1°C)

Repeatability of Readings

±0.8% of reading or <±2°F (1.0°C), whichever is greater

Power

AA Battery

Battery Life

10 hours with laser and backlight on

Operating Temperature

32 to 122°F (0 to 50°C)

Storage Temperature

-4 to 140°F (-20 to 60°C), without battery

Operating Humidity

10% to 90% RH non-condensing at 86°F (30°C)

Operating Altitude

6561.7' (2000 m) above mean sea level

Storage Altitude

39,370.08' (12,000 m) above mean seal level

Drop Test

9.8' (3 m)

Dimensions

6.88 x 3.34 x 2.95" (175 x 85 x 75 mm)

Weight

0.56 lbs (255 g)

IP Rating

IP 54 per IEC 60529

Vibration and Shock

IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms

EMC

EN 61326-1:2006 EN 61326-2:2006

Standards and Agency Approval

Compliance: EN/IEC 61010-1: 2001
Laser safety: FDA and EN 60825-1 Class II

Reviews

There are no reviews yet.


Be the first to review “FLUKE 62 Max Mini Infrared Thermometer”

You've just added this product to the cart: