Fieldpiece TC24 Pipe-Clamp Thermocouple for Air Conditioning (3/8″-1-3/8″)

Fieldpiece TC24 Pipe-Clamp Thermocouple for Air Conditioning (3/8"-1-3/8")
Fieldpiece TC24 Pipe-Clamp Thermocouple for Air Conditioning (3/8"-1-3/8")
Fieldpiece TC24 Pipe-Clamp Thermocouple for Air Conditioning (3/8"-1-3/8")
Fieldpiece TC24 Pipe-Clamp Thermocouple for Air Conditioning (3/8"-1-3/8")

Fieldpiece TC24 Pipe-Clamp Thermocouple for Air Conditioning (3/8″-1-3/8″)

$56.95

The TC24, K-type pipe clamp thermocouple, is used to take temperatures of pipes or any other cylindrical surface with a jaw range of 3/8″ to 1-3/8″. Using a pipe clamp thermocouple greatly facilitates taking superheat or sub-cooling measurements.

SKU: TC24
Compare

Description

The TC24, K-type pipe clamp thermocouple, is used to take temperatures of pipes or any other cylindrical surface with a jaw range of 3/8″ to 1-3/8″. Using a pipe clamp thermocouple greatly facilitates taking superheat or sub-cooling measurements. Use the TC24 for most A/C units. The TC24 can be used with any of Fieldpiece meter that measures temperature and any thermometer accepting a K-type thermocouple.

The sensor is virtually isolated from ambient conditions, allowing the thermocouple to read the true pipe temperature for as long as it is attached. The sensor’s large surface area and increased clamping force help the sensor reach the correct temperature within 30 seconds. Because the jaw is designed for HVAC/R, its clamping ability lets you measure temperatures of pipes that are fixed, at any angle, to walls or other surfaces.

Product Features

  • TC24 – Pipe-Clamp Thermocouple 3/8” to 1 3/8” for Air Conditioning
  • Pipe-Clamp Thermocouple 3/8” to 1 3/8” for Air Conditioning – TC24
  • Accuracy and Speed
  • Get your pipe temperatures fast. A new sensor gives accurate readings, even in hot and windy conditions. Use the TC24 Pipe Clamp Type K Thermocouple to take temperatures of pipes or any other cylindrical surface between 3/8″ and 1 3/8″.
  • The clamping range covers most sizes seen in residential and light commercial cooling systems. Connect to any thermometer with a Type K thermocouple jack.
  • The sensor is specifically designed for pipe temperature readings. Readings are extremely accurate and fast. Easily measure temperatures of pipes that are fixed, at any angle, to walls or other surfaces.

Additional information

Jaw Range

3/8" to 1-3/8" pipe diameter (outside diameter)

Accuracy

+/- 4ºF (2°C) ; ±1°F (0.5°C) after field calibration 32 to 176ºF (0 to 80°C)

Temperature Range

-50° to 257°F (-46° to 125°C)

Thermocouple Conductors

K-type nickel chromium/nickel aluminum
Probe Insulation:
Calibration and atmosphere will affect maximum useful temperature in applications. The wire insulation and clamp material are designed to withstand a maximum continuous use at 257°F (125°C)

Plug Type

K-type thermocouple male mini plug

Typical Stabilization Time

Less than 30 seconds

Type

Pipe Clamp Thermocouple

Reviews

There are no reviews yet.


Be the first to review “Fieldpiece TC24 Pipe-Clamp Thermocouple for Air Conditioning (3/8″-1-3/8″)”

You've just added this product to the cart: